DERC-Salotech-Runner-Nozzles

DERC Runner Nozzle

Diameter, мм:
10, 13, 18, 24
Operating pressure, bar:
0-1500
Bullet head:
standart, unplugger, polisher
Threaded connection:
metric, BSP, NPT, MP RH or LH

The DERC Runner is a rotating nozzle for cleaning heat exchanger tubes. The presented model is available in sizes 10, 13, 18, and 24 mm and is designed to remove hard plugs or limescale. Hardened nozzle body and high-efficiency jets. Maximum working pressure 1500 bar.

DERC Spin-Jet Nozzle SI

Diameter, мм:
6, 8, 10, 12, 18, 28, 40, 50
Operating pressure, bar:
0-1500
Jets:
4x 90° radial and optional front jet
Threaded connection:
metric, BSP, NPT, MP RH or LH

DERC Spin-Jet SI. The model is designed for hydrodynamic cleaning of heat exchange equipment, pipes, and lines, where perfect clean without any "streaks" is necessary. With 4 radial jets, the model is specially designed for removing any hard deposits. The nozzle can be delivered with a plug removal nozzle. This nozzle is a “neutral tip”, which means that for flex lance applications this model can be used in combination with a pusher, which turns it into a pulling nozzle.

O.E.M Nozzles

Diameter, mm:
7-50
Operating pressure, bar:
0-3000
Jet pipes:
custom configuration
Threaded connection:
metric, BSP, NPT, MP RH or LH

O.E.M. nozzles are a versatile product from DERC Salotech. Each nozzle in this product line has a wide range of configurations. The nozzles are tailor-made to your specifications and are optimally tuned to your operating conditions. The design of the nozzle ensures optimal flow and the best cleaning results. The nozzle is protected from mechanical damage and corrosion-resistant. Good value for money.

Nozzle DERC SPC L

Diameter, mm:
95
Operating pressure, bar:
0-1500
Max.flow, l/min:
55-210
Threaded connection:
metric, BSP, NPT, MP RH або LH
Rotation speed, PM:
50-300

DERC SPC L is a compact stainless steel centralizer. The rotating nozzle is water-driven and has an operating pressure of up to 1500 bar. It is used for cleaning curved pipes with a high-pressure water jet. Simple adjustment rotation speed depending on the level of deposits, sludge. SPC-L is designed and manufactured for water blast cleaning of pipes up to 6 ” with elbows and up.

Nozzle DERC SPC M

Diameter, mm:
69
Operating pressure, bar:
0-1500
Max.flow, l/min:
50-115
Threaded connection:
metric, BSP, NPT, MP RH або LH
Rotation speed , PM:
40-250

DERC SPC M is a compact stainless steel centralizer. The rotating nozzle is water-driven and has an operating pressure of up to 1500 bar. It is used for cleaning curved pipes with a high-pressure water jet. Simple adjustment rotation speed depending on the level of deposits, sludge. The SPC-M nozzle is designed for water blast cleaning 4-inch pipes.

Nozzle DERC SPC S

Diameter, mm:
35
Operating pressure, bar:
0-1500
Max.flow, l/min:
30-50
Threaded connection:
метрические, BSP, NPT, MP RH або LH
Rotation speed, PM:
100-300

DERC SPC S is a compact stainless steel centralizer. The rotating nozzle is water-driven and has an operating pressure of up to 1500 bar. It is used for cleaning curved pipes with a high-pressure water jet. Simple adjustment rotation speed depending on the level of deposits, sludge. The SPC-S nozzle is designed to water blast cleaning of pipes smaller than 2 inches.

Nozzle DERC SPC UHP 3000

Diameter, mm:
70
Operating pressure, bar:
0-3000
Max.flow, l:
17-55
Threaded connection:
3/4”UNF F
Rotation speed , PM:
100-500

DERC SPC UHP 3000 nozzle is a water-driven rotating nozzle with operating pressures up to 3000 bar. Ideal for cleaning horizontal and vertical pipes with multiple elbows (bent pipes). This nozzle has a compact, stainless steel design that ensures that she can unplug, polish, or work on long lines without a problem. Simple adjustment of the rotation speed. Supplied with a special tool for easy and safe maintenance.

Pipe cleaning nozzle DERC SLC

Diameter, mm:
75
Operating pressure, bar:
0-1500
Max.flow, l:
until 380
Threaded connection:
3/4" NPT F, M24 x 1.5 F

SLC by DERC Salotech is a unique pipe cleaning tool. With regulation nozzle speed: slow speeds for clogged pipes with hard deposits and fast speeds for cleaning the inner walls of the pipes. You can optimize the efficiency of the nozzle for specific cleaning conditions using additional elements, such as heads of variable diameters, ports, extensions nipples, pulling rings, extensions arms, which are also available in the range.

DERC SALOTECH in profile

DERC Salotech has 35 years of experience in the development of high-pressure water jetting technology and the production of accessories required for hydrodynamic cleaning.

DERC Salotech’s production facilities are located in two countries: Netherlands and Germany.

The company is an original equipment producer that develops and launches innovative products. Creates a safer and more economical way for industrial hydrodynamic cleaning.

LLC “Hydroservice” is the official representative of DERC Salotech in Ukraine.

In our catalog, you can review the main items of goods.

We will advise and help you to choose the optimal configurations of equipment and accessories for solving your problems.